Now is the time to upgrade your headlights! Starry Night Halos has the newest technology of halos on the market. Stop blending in with single color halos and stand out with our color chasing halo kits! Starry Night Halos kits give you the ability of color changing colors with over 199+ color chasing patterns. Our halos are very bright and can be seen during the daytime.
The RGBA + Chasing + Switchback Starry Night Halos ups the bar when it comes to halo kits. Not only do these halos have color changing and color chasing options, they can also be connected to your turn signals and switch to amber with a sequential motion. The switchback sequential signal can be activated while the halos are on any color! No longer do you have to pick if you want switchback halos or color changing, get these all-in-one halos today!
How to Order:
This product is a halo kit only and does not include a set of headlights. A controller is needed to operate a Starry Night Halos kit. Please be sure to select your controller from the drop-down menu. A plug and play harness, with the selected connections, will be included with the purchase of a controller.
Each universal sized Starry Night Halos kit comes with 2 halos. The RGBA+Chasing+Switchback Sequential halos come with 1 switchback driver as well. Each switchback driver has two connections to connect to the halos. If you only want to control 1 RGBA+Chasing+Switchback Starry Night Halos kit, select a controller that says, "Controls up to 1 driver". If you want to control more than 1 RGBA+Chasing+Switchback Sequential Starry Night Halos kit, select a controller with the appropriate driver connections.
RGBA + Chasing RF Controller
300 Chasing Patterns
- 4 Solid Colors - Red, Green, Blue, and Pure Amber
- Brightness and Speed controls.
Chasing Bluetooth Controller
200 Chasing Patterns
- Color Wheel Picker - Red, Green, Blue, Yellow, Cyan, Purple, Pink, Orange, Pure Amber, and more!
- Brightness and Speed controls.
- Drop-down Chasing Mode selection
2x - 160MM Black PCB RGBA + Chasing + Switchback Sequential Starry Night Halos
1x - Switchback Driver4
1x - Plug and Play Harness is included when a Controller is purchased with your halo kit.
1x - Wiring Instructions
Starry Night Halos RF Wireless Controller
Starry Night Halos Bluetooth Controller
Mount all controller receivers inside of your vehicle. Failure to do so will void the warranty and cause issues with your controller and halo kit.
All of Starry Night Halos are 5v and must be powered through the Plug and Play Harness to avoid frying the halos.
Do not touch Starry Night Halos with bare hands. We recommend using an ESD wrist strap when dealing with any of our products. Touching the diodes while the halos are powered can burn that diode out on the halo causing failure of the halo.
Use the 3m tape provided to mount your Starry Night Halos. Do not use bare beading wire to mount the halos. If the bare beading wire touches a solder joint, it will cause a short and ruin your halo kit.
The Starry Night Halos Bluetooth controller must be powered through the Plug and Play Harness. DO NOT peel the "void if removed" sticker off add power and ground wires to the other end of your Bluetooth controller.
Running your Starry Night Halos while your headlights or fog lights are on can greatly reduce the life of your halos. Do not run HID bulbs in your fog lights if you are running fog light halos or you will increase the chance of failure of your halos.