Starry Night Halos RGBW Demon Eyes Bluetooth Controller is an awesome way to control your Starry Night Halos RGBW demon eyes. This controller is a standard 5 pin RGBW controller that can be controlled from your Apple or Android devices.
RGBW Demon Eyes Bluetooth Controller
- Starry Night Halos RGBW Demon Eyes
- Any universal 5-wire RGBW items
Apple App Download
Android App Download
1x - Starry Night Halos RGBW Demon Eyes Bluetooth Controller
1x - Power & Ground wires ring terminals pre-attached
This controller CAN NOT control the Starry Night Halos or Strips, only the RGBW Demon Eyes or other 5 wire RGBW items.
Mount all controller receivers inside of your vehicle. Failure to do so will void the warranty and cause issues with your controller and halo kit.
All of Starry Night Halos are 5v and must be powered through the Plug and Play Harness to avoid frying the halos.
Do not touch Starry Night Halos with bare hands. We recommend using an ESD wrist strap when dealing with any of our products. Touching the diodes while the halos are powered can burn that diode out on the halo causing failure of the halo.
Use the 3m tape provided to mount your Starry Night Halos. Do not use bare beading wire to mount the halos. If the bare beading wire touches a solder joint, it will cause a short and ruin your halo kit.
The Starry Night Halos Bluetooth controller must be powered through the Plug and Play Harness. DO NOT peel the "void if removed" sticker off add power and ground wires to the other end of your Bluetooth controller.
Running your Starry Night Halos while your headlights or fog lights are on can greatly reduce the life of your halos. Do not run HID bulbs in your fog lights if you are running fog light halos or you will increase the chance of failure of your halos.